# The goal: pregnant cows

Resize text

The goal on any dairy should be to get cows pregnant. The metric we need to evaluate to determine if we are reaching this goal is the 21-day pregnancy rate (PR). All too often, dairy producers concentrate on conception rate (CR) and fail to recognize the economic value of pregnancy rate.

So, what are the differences? CR can be mathematically expressed as the number of cows confirmed pregnant divided by the total number of cows inseminated. So, if we breed 100 cows and 35 are pregnant, our CR is 35 percent.

Pretty simple.

Pregnancy rate is expressed as the number of cows confirmed pregnant divided by the number of cows eligible to be inseminated in a 21-day period. It is the efficiency by which we get cows inseminated and confirmed pregnant. If we confirm 25 pregnancies and there were 100 cows eligible to be bred in a 21-day period (for this calculation we do not care how many we actually did breed), then our PR is 25 percent.

Of course, we want to optimize the conception rate. However, if our goal was to maximize conception rate, then we would only breed cows that were in an absolutely obvious standing heat and forget about any synchronization programs. We need to get cows inseminated. That is the bottom line.

The key concept we must concentrate on is decreasing the interval between inseminations. We need to identify open cows in a timely manner and get them rebred. Obviously, excellent heat detection is one very important aspect to attain this. Regular herd health pregnancy/open exams and a consistent resynchronization program are the others.

When utilizing synchronization programs, it is important to keep the cow’s natural estrus cycle in mind. I still find many programs that are not combining examination for pregnancy and resynchronization at the most biologically opportune time. We need to work with Mother Nature, not against her.

Through all of these decisions, we must remain conscious of the significant impact reproduction has on the economics of the dairy. By increasing pregnancy rate, we:

• Increase milk production (Increase the time a cow is in the higher production portion of her lactation curve.) This holds true even with the use of bST.
• Increase herd replacement opportunities. Every dairy has cows that should be replaced.
• Increase lactation number. Second-lactation cows produce more milk than first-lactation cows, as do thirds over seconds.
• Increase the number of calves born per year. Although the near-term economic impact of this is small, eventually these heifers can replace suboptimal cows or be sold as springers (assuming the dairy can raise heifers better or less expensive than they can purchase them).

Dairy-specific goal-setting can be useful in the evaluation of your reproductive program. Obviously, these values may vary depending on your management style. The following are some useful reproductive goals which apply to most dairy herds:

• Recent pregnancy rate is greater than 20 percent.
• 50 percent of the herd is confirmed pregnant at any given time.
• First service percent pregnant is greater than 30 percent.
• Average days to first breeding is ½ estrous cycle (about 10 days) greater than your voluntary waiting period (VWP). (In a herd with a VWP of 60 days, the average days to first breeding should be 70 days).
• Heat detection rate is greater than 50 percent.

Research shows that most high-producing cows are in heat for about seven hours and will show three to 12 standing events during that period. This only gives us a very small window to detect heat and breed. Work with your dairy team to develop a simple, but effective, protocol to optimize the reproductive performance of your herd.

Mark J. Thomas is a veterinarian and partner in Countryside Veterinary Clinic, LLP in Lowville, N.Y.

Name
e-Mail (required)
Location

Comment:

characters left

Sudhanva Patankar

The article by Mr. Mark J. Thomas : The goal: pregnant cows : provides a totally new & innovative concept. This shall help the farmers greatly. In India, I would like to canvas this concept through several Agricultural Institutes I am in touch with, in connection of my unique patent approved concept of " Complete Nano Dairy Plant" of 1,000 LPH capacity installed installed in 40' x 8' x 9.5' Export Container comprising of modern Milkotronic System with weighing scale, Ventury Filter, Dump Tank, Pasteurizer, Homogenizer, On Line Filter, Storage Tank, Pouch Packing Machine, Cold Storage, Hot Water Generator with tank, Glycol Chilling Plant with tank, Air Condenser Units, Main Control Panel, Satellite control panel at container entry, 1.5" Diameter x 2 mm thick SS pipe line & LED Lights for illumination. Thus, my concept enables installation of a complete modern plant in a container. The main advantages are:- a) There shall be a dairy plant where the cattle are, b) Raw Milk shall be totally processed in the modern way within a couple of hours of milking the cattle .c) The unwanted costs of Bulk Cooling,d) Distant Transportation to large dairy, d) Heavy Overheads of large dairies, e) Re-transportation to consumer and most important f) the time lag between the milking of cattle and consumption of milk by the buyers of 4 - 6 days. Since this plant is meant to be installed in the rural areas' cattle fields, I shall be touring these areas in India & around the world. I request you to kindly provide me more techno-Economical information on the captioned subject, to enlighten me further in the matter. With Best Regards, Sudhanva Patankar, Supa Sales & Services Pvt. Ltd., C - 209, A H W H Co. Mumbai 400037. INDIA.

## 5M Series

Five M Series Models: 5065M, 5075M, 5085M, 5100M, and 5115M (65-115 hp). If you spend a lot of time on ... Read More

)