Expert offers tips to reduce hay-drying time

 Resize text         Printer-friendly version of this article Printer-friendly version of this article

While producers might find it challenging to get hay dry in early June due to changing weather conditions, there are steps they can take to get the crop up quickly and reduce the potential for rain damage, a forage expert with Ohio State University's College of Food, Agricultural, and Environmental Sciences says.

"Proper tedding, raking, and equipment care are just some of the steps producers can take to reduce drying time and produce high-quality hay," said Clif Little, an educator with the college's outreach arm, Ohio State University Extension.

Although drying time for hay is affected by forage species, environmental conditions, cut height and swath width, Little said a good management plan can make a big difference in hay quality.

"Cutting and drying hay quickly is always important, especially with everything being a little behind this year because of the planting season," he said. "Feed prices are high, so anything producers can do to produce quality hay is a benefit.

"We're fighting rain as well as other work we've got to do around the farm. But we still have to get hay up quickly because when we get rain on our forage it can be devastated or ruined. So using these steps may allow producers to get it up a day or two earlier."

Little's tips:

  • Make sure hay-mowing equipment rollers are adjusted properly.
  • Cut hay in the morning after the dew is off to help speed drying time and reduce the loss of carbohydrates due to respiration. Respiration is a natural process and continues until the plant dries to a moisture content of about 40 percent.
  • Lay high-yielding forages in a wide swath to give better access to sun and wind.
  • Use tedding to reduce drying time by spreading the hay. While tedding increases costs in terms of time and fuel, the increase is offset by a reduction in drying time.
  • Ted hay shortly after cutting and when it contains no less than 50 percent moisture to reduce leaf shatter and forage loss.
  • Rake hay at an optimal moisture content of 30 to 40 percent. Raking hay at the improper moisture content can contribute to loss of plant leaf material. Raking when the hay is ready to bale (very dry) can cause major leaf shatter and reduce the overall nutrient content of the forage.
  • Bale hay at the proper moisture content based on the size and shape of bales to reduce harvest and storage loss. For most small rectangular and large round bales, the recommended baling moisture content is 18 percent. For high-density large rectangular bales, the range can be 12-14 percent moisture for proper storage.
  • If storing hay outside, make sure you choose a location that is dry, preferably on a solid surface, such as rock, and make sure the location is high and open to wind.

Comments (2) Leave a comment 

e-Mail (required)


characters left

Earl B.    
Ohio  |  June, 17, 2013 at 10:22 AM

We stopped screwing around with dry hay years ago. Chop it and ensile it. Even then endless rain can be a problem but it knocks 2-3 days off the drying time and makes feeding a breeze all winter. If I never wrassle with another scruffy big round bale I will be a happy camper. Leave the haymaking to those guys in Idaho and Washington who can turn the irrigation off and on at will. It is a waste of time needlessly fighting the weather unless you simply refuse to modernize. Maybe the Amish are still required to make dry hay? What's your excuse for staying old fashioned?

VA  |  June, 19, 2013 at 10:29 AM

All we really need is a stimulus program to build sheds over our hay fields with clear retractable roofs that can act as a greenhouse when appropriate. This would extend the growing season by several months giving additional cuts and hey would never get wet after being cut. This would also create thousands of jobs and lift our economy. While we are setting up this boondoggle, we need a government grant to install ethanol burners on our disk mowers to dry the hay so it can be baled immediately after cutting. This will also create a demand for an ethanol product our government is already subsidizing. Think about it-- A green economy supporting a green economy. Saving the environment and creating good high paying jobs, what do we have to lose?

5E Series

Introduced in 2013, the new 85 and 100 hp John Deere 5085E and 5100E feature 4-cylinder Interim Tier 4 emissions-compliant ... Read More

View all Products in this segment

View All Buyers Guides