Slowly Incorporate New-Season Silage for Optimal Performance
As silage is opened and fed, it is once again exposed to air. Oxygen allows aerobic organisms that survived the ensiling process — such as bacilli, molds and especially yeasts — to grow.
These microbes use sugars, lactic acid and other nutrients for growth and produce water, carbon dioxide and heat as end products. Excessive heat accumulation can denature proteins and other nutrients in the silage. Molds growing on the silage may also produce mycotoxins that can reduce animal performance and cause herd health and fertility issues.
Heating and spoilage during feedout is one of the greatest contributors to dry matter (DM) and nutrient losses in silage production. To minimize these losses, be sure to use good face management by maintaining a straight feedout face with shavers. Avoid removing silage too far ahead of feeding, do not leave silage sitting around in loose piles and feed out at a rate fast enough to avoid heating.
Research-proven inoculants can help reduce the growth of spoilage yeasts and molds. Inoculants containing Lactobacillus buchneri 40788 applied at a minimum of 400,000 CFU per gram of silage or 600,000 CFU per gram of high-moisture corn (HMC) have been reviewed by the FDA and allowed to claim improved aerobic stability.
When changing over to feeding the new-season silage, remember it is different feed compared to what the cows have currently been getting. Make the changeover gradually, substituting 25% of the “old” silage with new each week. For example:
- Week 1: 1% to 25%
- Week 2: 50%
- Week 3: 75%
- Week 4: 100%
A schedule such as this should minimize the chance of digestive upsets. But also keep in mind the digestibility of the starch in corn silage can increase greatly over eight to 10 months of storage. This should be checked on a monthly basis so that rations can be adjusted if necessary.
Combining good feedout management with a research-proven inoculant will help provide new forages that are aerobically stable from start to finish and help keep production levels stable.
Question about silage management? Ask the Silage Dr. on Twitter, Facebook or visit www.qualitysilage.com.
